Superheat Limited

P: +64 3 389 9500
F: +64 3 389 9666
E: info@superheat.co.nz

PO Box 19-001
Christchurch 8241
9 Radley Street
Christchurch 8023
New Zealand
Boiler diagram with measurements

Technical Specifications

Model No. BU02E BU05E BU10E BU25E
Capacity (litres) 2 5 10 25
Initial draw off (200ml cups) 10 25 50 125
Delivery (cups first hour) 130 145 170 305
A width (mm) 307 307 307 390
B Depth (mm) 130 130 175 260
C Height (mm) 350 550 640 700
Element size (kw) 2.2/2.4 2.2/2.4 2.2/2.4 3.6
Electrical Supply 2m Power Cord (C)
extra hot out standard for 25litre, optional extra for 5 and 10 litre units

Note: 1 cup = 200mls. Supply pressure below 200kpa will reduce delivery below capacity stated above.

Notes

BU05E redred
  • Voltage Rating: 230 - 240 V AC, 50 Hz, single phase
  • Inlet and overflow connections: R 1/2 inch or 15 mm (1/2 inch BSP) Male
  • Minimum water supply pressure: 200 kpa
  • Maximum water supply pressure: 1000 kpa
  • Stop tap and union not supplied.
    For concealed plumbing connections, contractor should install two R 1/2 inch or 15 mm (1/2 inch BSP) female wing back tee/elbow.
  • Technical manual and installation templates supplied with each unit

Contact us if you have any queries.